Plate heat exchanger low temperature heating system

MaxDapra Swimming Pool Heat Exchanger – Efficient Pool Heating Made from High-Polish Stainless Steel The MaxDapra Swimming Pool Heat Exchanger is the perfect solution for reliable and efficient pool heating. Made from high-quality V4A stainless steel, this heat exchanger stands out for its durability, corrosion resistance, and elegant high-gloss finish. Its well-thought-out design, suitable for high pressures, ensures optimal heat transfer and is suitable for both horizontal and vertical installation. Technical Details and Advantages: High-Quality Materials: Housing made of V4A stainless steel, high-gloss polished, with an outer jacket diameter of 125 mm. Robust construction for long service life and corrosion protection. Connection Options: Internal thread of 1 ½" and external connection with a 50 mm diameter. Hose nozzles and clamps allow flexible integration into the filter circuit. Connections for pool heating supply and return in ¾" or 1". Pressure Resistance: Maximum pressure values: 10 bar on the heating side (primary circuit) and 3 bar on the pool water side (secondary circuit). Efficient Function Principle: Cross-flow heat exchanger with horizontal stainless steel coil for high flow capacity and optimal heat transfer. Temperature difference between A and B should ideally be 10–20 °C, depending on the pool pump performance. Flexible Installation: Can be installed horizontally or vertically. Frost-proof installation to avoid damage during cold months. Important Notes on Use and Maintenance: Corrosion Prevention: Do not introduce metals that may cause contact corrosion. Use stainless steel or plastic brackets to prevent external corrosion damage. Avoid iron-containing dripping water on the heat exchanger. Air Venting: The primary side (A/B) must be carefully vented after commissioning if no performance is observed. Recommended Pool Water Values: Free chlorine: max. 1.3 mg/L. Chloride content: max. 500 mg/L. pH value: 6.8–8.2. Additional Notes: Disinfection Devices: Should always be installed after the heat exchanger to prevent chemical or gas intrusion during idle periods. Application: Ideal for swimming pools requiring a long-lasting, highly efficient heating solution. With the MaxDapra Swimming Pool Heat Exchanger, you are choosing a high-quality and reliable pool heater that flexibly adapts to your needs. Rely on a powerful combination of innovative design, robust construction, and excellent heat transfer – for a pleasant bathing experience all year round!

MaxDapra Electric Pool Heater – Efficient and Reliable Pool Heating in Stainless Steel or Titanium The MaxDapra Electric Pool Heaters are a powerful and durable solution for heating swimming pool water. They combine smart design for minimal pressure loss with high-quality materials such as V4A stainless steel or titanium that meet even the most demanding requirements. With a heating capacity of up to 18.0 kW, the MaxDapra electric pool heater provides effective and even heat transfer – ideal for private and commercial pools. Technical Details and Advantages: High-Quality Heating Elements: Equipped with Incoloy 825, offering excellent resistance to aggressive pool water. Minimal Pressure Loss: Special design ensures maximum efficiency with consistent flow. Material Flexibility: Stainless Steel (V4A): Electropolished housing for durable protection and attractive design. Titanium: Silver-coated, ideal for extreme conditions and high corrosion resistance. Enhanced Safety: Adjustable thermostat with temperature range from 0 to 40°C. Automatic overheat protection to prevent damage. Integrated pressure switch for optimal operation. Easy Installation: Connections with 1 ½" F and wall mounting make installation easy. Installation must be performed by a qualified electrician. Important Application Guidelines: Water Parameters for Stainless Steel Models: Chloride content: max. 500 mg/L Free chlorine: max. 1.3 mg/L pH value: 6.8 – 8.2 Salt: max. 500 ppm-mg/L Bromine: max. 4 mg/L Maintenance and Protection: Pool disinfection units must be installed after the heater to prevent chlorine gas ingress during idle periods. Additional Advantages: Versatile Applications: Perfectly suited for pools of any size requiring a reliable and long-lasting heating solution. User-Friendly: Precise temperature control and robust components for smooth operation. Installation Safety: Required protective circuit ensures safe operation. The MaxDapra Electric Pool Heater is the ideal solution for efficient and gentle pool heating. It meets the highest standards in performance and safety, ensuring long-term use even under demanding conditions. Trust MaxDapra for quality and precision!

Elecro Smart Titan Pool Tube Heat Exchanger – Maximum Efficiency and Innovative Technology for Your Pool The Elecro Smart Titan Pool Tube Heat Exchanger is a powerful solution for the efficient heating of pool water. Equipped with a compact multi-tube bundle element made of titanium, this heat exchanger offers excellent efficiency with minimal energy losses. Thanks to its optimally insulated outer chamber, consisting of V4A stainless steel, an aluminum housing, and a plastic filling, it is built for maximum efficiency and durability. Technical Details and Advantages: Innovative Materials: Primary circuit made of titanium for excellent corrosion resistance and optimal heat transfer. Secondary circuit made of AISI 316L (V4A) stainless steel, perfect for safe and long-lasting use. Optimal Heat Performance: Small chamber volume combined with the large surface of the titanium tubes guarantees highest efficiency. Suitable for demanding water treatment processes, including salt electrolysis. Flexible Connection Options: Primary water connection: 1" BSP internal thread, including brass thread adapter. Secondary water connection: 1 ½"/50 mm glue connection, compatible with standard pool systems. Versatile Installation: Can be connected in reverse depending on installation setup. Horizontal or vertical installation possible. Enhanced Insulation: Additional thermal efficiency through the aluminum housing and plastic filling. Safety and Durability: Compatible with high pressures (10 bar primary, 3 bar secondary) and corrosion-resistant materials. Accessory: Elecro Smart Touch Screen Heating Controller The optional Elecro Smart Touch Screen Heating Controller makes controlling the heat exchanger easy and offers a variety of features: Digital touchscreen display for intuitive operation. Building Management System compatibility (BMS integration). Priority heating for consistent care and perfect pool temperature. Highly precise temperature control accurate to 0.5 °C. Diagnostic display for monitoring and fault detection. Included: 1 m cable, flow sensor, flow switch, and NTC temperature sensor. Application Recommendations: Efficient Integration: Perfect for pool systems with special requirements for corrosion resistance and water quality. Regular Maintenance: Ensure that no metals are introduced that could cause corrosion. Flexible Use: Compatible with various pool systems and installation scenarios. With the Elecro Smart Titan Pool Tube Heat Exchanger, you choose an innovative and durable solution for heating your pool. Experience maximum efficiency, optimal heat transfer, and easy operation – for a perfect swimming experience all year round. Trust Elecro for forward-thinking and reliable pool technology!

Peraqua Smart Inverter Pool Heat Pumps – Energy-Efficient and Quiet Pool Heating for Maximum Comfort The Peraqua Smart Inverter Pool Heat Pumps are an innovative solution for energy-efficient pool heating. Equipped with advanced 3-stage inverter compressors, these heat pumps dynamically adjust their speed to match energy demand and ambient temperature – unlike conventional heat pumps with fixed speeds. This intelligent control ensures maximum efficiency and also reduces noise levels, guaranteeing quiet operation. Technical Details and Advantages: 3-Stage Inverter Technology: Dynamically adjusts speed to pool demand and weather conditions – higher energy efficiency and reduced operating costs. EEV Technology: The electronic expansion valve allows precise gas flow regulation and responds faster to temperature fluctuations. This results in a performance increase of 15–20% compared to conventional technologies. Titanium Heat Exchanger: High-quality titanium tubing is compatible with salt electrolysis systems and ensures long-lasting, corrosion-resistant performance. Hot Gas Defrosting: Equipped with a 4-way SAGINOMIYA valve, this function offers automatic defrosting and allows operation above 0 °C – ideal for all seasons. Eco-Friendly Refrigerant: The use of the new R32 refrigerant reduces environmental impact and meets EU regulations. Quiet Operation: Optimized technology ensures minimal noise – ideal for both private and commercial use. Additional Features: Robust Construction: Painted metal housing and vibration absorbers for durable and quiet use. Easy Installation: Includes winter cover and compatible for pools with a volume of 15 to 80 m³. Modern Control: Inverter Plus models feature a corrosion-free plastic housing, touch control with Wi-Fi connection, and a free app for remote operation. Advanced Functions of the Inverter Plus Model: Stepless Inverter Technology: Even more precise performance adjustment to operational requirements. Modbus Compatibility: Allows easy integration into existing control systems. Touch Control and App: Intuitive control via mobile devices makes operation effortless. Application Recommendations: Flexible Use: Suitable for pools with a volume of 15–80 m³, for both private and commercial applications. Year-Round Operation: Ideal for all seasons thanks to automatic defrosting and weather-independent operation. Regular Maintenance: Recommended to maximize the efficiency and lifespan of the heat pump. With Peraqua Smart Inverter Pool Heat Pumps, you choose a future-oriented, energy-efficient, and user-friendly pool heating solution. Experience maximum comfort and enjoy perfectly tempered water – regardless of weather conditions. Trust Peraqua for innovative technology and sustainable pool care.

Hayward Pool Heat Pump S.Line PRO FI – Efficient Heating Technology for Maximum Comfort The Hayward Pool Heat Pump S.Line PRO FI combines cutting-edge full-inverter technology with intelligent design and control features to provide your pool with both efficient heating and sustainable energy savings. With dual air outlets, optimized rotor blades, and an innovative heat exchange system, this heat pump delivers top performance with minimal noise. Designed for small spaces, it is particularly compact and versatile – ideal for private and commercial applications. Technical Details and Benefits: Full-inverter technology: Combines a state-of-the-art dual rotary compressor with a precise DC inverter fan for maximum efficiency and minimal operating costs. Quiet and powerful: Ensures quiet operation through optimized airflow – ideal for small spaces with only 20 cm wall clearance. Sustainable and eco-friendly: With R32 refrigerant, the heat pump complies with the EU F-gas regulation and reduces the impact on climate change. High heating performance: Operates down to an outside temperature of -10 °C, with an intelligent control system for precise adaptation to heat comfort and energy consumption. Modern control concept: Stylish touch display, Bluetooth connection, and optional Wi-Fi module for convenient remote control. Robust design: Metal housing with metallic coating, corrosion- and UV-resistant – for long service life even under demanding conditions. Titanium heat exchanger: Especially durable and compatible with various water treatment systems including salt electrolysis, UV, and chemicals. Technical Variants: HP508: Heating capacity: 5.91 kW / 8.16 kW COP: 4.62 / 6.81 Noise level: 45.1 dB / 27.9 dB (at 1 m / 10 m) Weight: 61 kg Recommended flow rate: 3.5 m³/h HP511: Heating capacity: 8.4 kW / 10.9 kW COP: 4.59 / 5.67 Noise level: 48.6 dB / 31.6 dB (at 1 m / 10 m) Weight: 61 kg Recommended flow rate: 4.6 m³/h HP515: Heating capacity: 11.67 kW / 15.66 kW COP: 4.31 / 5.59 Noise level: 54.1 dB / 36.9 dB (at 1 m / 10 m) Weight: 87 kg Recommended flow rate: 6.7 m³/h Application Recommendations: Installation: The heat pump requires only 20 cm wall clearance, making it ideal for small spaces. Use at low temperatures: Operates reliably down to -10 °C. Regular maintenance: Optimal performance through regular inspection of the water connection (d50 glue fitting) and cleaning of the heat exchanger. The Hayward Pool Heat Pump S.Line PRO FI is your ideal choice for efficient and eco-friendly pool heating. With its combination of state-of-the-art technology, robust design, and high performance, it provides perfect heat comfort and maximum energy savings. Enjoy pleasantly heated water all year round!