Prefabricated pool

MTH swimming pool prefabricated pool Sunstar The prefabricated swimming pool Sunstar is a prefabricated swimming pool made of screwed steel elements. These steel elements have a width of 50 cm, a height of 150 cm, material thickness is 1.5 mm, a steel element weighs just 13 kg. The elements are plastic-coated and also high-quality galvanized, the material is high-strength steel. The very modern, high-quality materials were actually developed for the automotive industry and offer extremely high strength and also very effective corrosion protection for a very long service life. The manufacturer therefore provides a 10-year guarantee against rusting through on this swimming pool if the requirements have been met.   No damage to the steel jacket during transport, assembly of the swimming pool and during use. All additional openings in the steel jacket must be protected against corrosion, for example with a double seal. Stainless steel components are unsuitable.   The swimming pool lining, also called pool liner, consists of a 0.8 mm thick, pre-assembled blue inner shell that is hot-wedge welded.   Swimming pool prefabricated pool included - Plastic-coated, galvanized, high-strength steel elements 50 cm wide x 150 cm high and with a material thickness of 1.5 mm - 1 element with skimmer cutout for pool skimmer type 11309 or 11310 - 2 elements with nozzle cutout for the swimming pool 2 "inlet nozzle - 4 hot-dip galvanized steel corner supports, one steel wall support every 2 meters - Galvanized and also plastic-coated U-profiles for holding the steel segments below and above - M10 hexagon bolts galvanized with nuts and washers, heavy-duty dowels for fastening the intermediate supports, corner supports and steel elements on the concrete floor slab - Straight hard PVC fastening profile for hanging in the gusset including the screws - 4 quarter-circle curved hard PVC fastening corner profiles, which allow a very easy hanging of the gussets - 4 polyethylene foam profiles, also called PE profiles, 150 cm long, rounded for gluing in the vertical swimming pool corner - Around 0.8 mm blue swimming pool inner shell with gusset, also called pool liner - Piping for closing the profile after hanging the gusset for a clean end and also securing the gusset   All pool foils are thermoplastics. At constant temperatures above 28 degrees Celsius, wrinkles can form. With fabric-reinforced pool foils, the maximum continuous temperature is 32 ° Celsius.   Matching optional swimming pool prefabricated pool installation parts as accessories   Swimming pool plastic installation parts - 1 pool skimmer with double seal - 2 swimming pool inlets - 1 swimming pool floor drain - including the required cutouts   Headlight set plastic - 2 plastic headlights with flange and double seal - 1 transformer 600 VA - 2 swimming pool plastic junction boxes - 2 cutouts for the 2 swimming pool lights   Similar to illustration